ADDITIONAL INFO LINKS
SECTION
VIEW: MODEL ESCA
SECTION
VIEW: MODEL ESCA-FP
SECTION
VIEW: MODEL ESCA-IS
SECTION VIEW: MODEL ESCA-FP-SL
APPLICATION:
Canopy style exhaust ventilator utilizing high velocity slot type grease
extraction with automatic internal water wash system and integrated dwell
and rinse cycles. The ESCA models are recommended for single or double
width applications, ceiling or wall mounted, over all types of cooking
equipment.
SPECIFICATIONS :
- UL Listed and built in accordance with NFPA
#96, NSF Listed and recognized by ICBO, BOCA and SBCCI.
- Constructed of 18 gauge, type 304 stainless
steel, #4 polish. All exposed joints and seams are continuously
welded, liquid-tight.
- Overall size is indicated on plans.
- Grease extraction is accomplished by a series
of baffles and turns creating increased velocity, causing grease
particles to be thrown centrifugally from the airstream. Removable
lower cartridge allows access to the hot water manifold.
- Positive closing stainless steel fire damper
mounted on 3/8" rod assisted by a fully enclosed spring-loaded
mechanism activated by a UL approved fusible link rated at 286F.
Access to fusible link and upper exhaust plenum area provided by means
of removable access doors not to exceed 40" in length.
- Exhaust duct collars are 8" high with a
1" flange. Duct sizes, CFM and static pressure requirements are
shown on plans.
- Automatic internal water wash system is
designed to provide a secondary protection in the event of a fire by
means of a 245F thermostat located at the duct collar which shuts off
the fans and activates the water wash sequence to prevent flame
spread.
- Incandescent light fixtures and globes are
installed and prewired to a junction box. Lamps to be provided by
others.
MAKE-UP AIR OPTIONS :
Incorporating one of the following make-up air
options, the Model ESCA is a compensating hood with integrated make-up air
provided through supply collars with volume and fire dampers located at
the top of the hood.
- FP OPTION:
Make-up air is discharged through full length stainless steel
perforated panels on the face of the hood.
- IS OPTION:
Make-up air is discharged into the hood capture area through a series
of diffuser plates and directed upward toward the air inlet of the
high velocity grease extraction chamber.
- FP-SL OPTION:
Make-up air is discharged at a low velocity through full length
removable stainless steel perforated panels which are angled to
provide increased area and low discharge velocity.
CONTROL PANEL OPTIONS :
An electrically controlled panel is provided as
part of the hood system to operate the internal cleaning system. The
control panel is completely assembled and prewired by the manufacturer,
ready for mechanical and electrical connections. The hot water manifold is
sized as shown on the plans. Control panel is UL Listed as a
"Subassembly for Exhaust Hood with Exhaust Damper."
- The EAM-2
panel provides pushbutton operation with relay control of the exhaust
and make-up air fans as well as the cleaning cycle of the ventilator
hood. The time period of the rinse cycle is adjustable up to 3
minutes. The control panel includes a combination pressure/temperature
gauge,shock absorber, pressure reducing valve, water solenoid
valve,detergent pump, line strainer and gate valve. See specification
sheet for details.
- The ETAC-3000
control panel is a state-of-the-art, 24 hour, seven day, solid state
water wash control panel, with a four line liquid crystal display and
user-friendly menu driven programming. Door mounted indicator lights
show the status of supply and exhaust fans, fire condition, water
valve, and AC power. Buttons on the stainless steel door, used to
control the programming, are touch sensitive with no moving parts. The
control panel is capable of controlling up to 5 wash zones
independently with user selected durations and delay time between
washing as well as controlling the fan ON and OFF times. Three
independent auxiliary outputs are programmable to control other
electrical devices which the user specifies. The plumbing manifold
includes a combination pressure/temperature gauge, shock absorber,
pressure reducing valve, water solenoid valve, detergent pump, line
strainer and gate valve. See specification sheet for details.
OPTIONS/ACCESSORIES
Lights:
- recessed incandescent
- fluorescent
Fire extinguishing system:
- Wet chemical (Ansul/Pyrochem)
- Water sprinkler (AquaFog)
- Cold Water Mist
Low air volume
Exhaust and supply fans
Heated supply fans
Others - consult factory
EMPIRE reserves the right
to modify the design, materials, and/or specifications as a result of code
requirements or product enhancements resulting from the Company's ongoing
research and development
|
